Rancilio Classe 7S Espresso Machine - 2 group head

Description

Rancilio Classe 7S Espresso Machine - 2 group head. Condition is good with just normal wear and tear. You will need to get the machine serviced during install to make sure the settings are to your specific needs.
Commercial Espresso Machine
Under the machine you should dedicate an open space of approx 17 x 17 x 12 (In w x h x d) for your filter and an external motor and pump (This is for machines that have external pumps) Rancilio do not have external pumps.
In order to connect of these up it is advisable to have a 3” hole drilled your bench, for water pipes and electricity cables. This hole should be set for the middle of the machine.
Water
You need to engage a licensed plumber to install a cold water outlet which is easily accessible. The water that is fed into the espresso machine must remain at 2 – 3 GPG otherwise most manufacturers will void your warranty.
Most espresso machine inlet hoses terminate in a 3/8? female fitting which will connect directly to a filter. We recommend that the water supply enter low on either side and near to the back surface within 40” of the machine.
Power Supply
Always use a licensed electrical contractor to connect your espresso machine. Your espresso machine will require a 220 - 240 Volt single-phase supply with the specific current protection ratings as per machine specifications.
IMPORTANTLY if your power or isolating switches are located in areas affected by water it is compulsory to install weatherproof power switches. The majority of commercial espresso machines will generally require a minimum 15A – 30A power supply. Some multi boiler 3 – 4 group machines may require a 40amp outlet to be installed. In these circumstances, it is recommend having a licensed electrician install a dedicated circuit for your espresso machine.